Wholesale · OEM · Export

Manual Tile Cutters Built for Large-Format Work

Ten machine lines — manual cutters from 0.6 m to 1.8 m, a cutting-and-chamfering machine, on-site chamfering and a cordless paving machine — 34 SKUs in total, plus the levellers, screeds and positioning tools that go with them. One supplier, one container, one packaging standard.

Solid steel rail Carbide scoring wheel 0.6–1.8 m cutting length 3–18 mm depth

Huangshan Zhantu Trading Co., Ltd. · Huangshan, Anhui, China · export@tikarotools.com

Manual tile cutter working on large-format tile
34
SKUs across ten machine lines
10
Machine lines, one spares line
200 units
Custom packaging from
What we do

One product category, handled properly

We are an export company, not a factory. That matters less than it sounds: what a distributor actually needs is one partner who knows this range well enough to answer a technical question, keep the carton specification stable between orders, and get the paperwork right at the destination port.

So we keep a narrow line. Manual tile cutters, tile chamfering, and the accessory kit that ships alongside them — levellers, screeds, folding rulers, lasers and vibrators. Nothing outside it. Our factory partners build the machines; we own the specification, the inspection, the packaging and the documents.

If you already distribute tile tools, you know the problem this solves: the cutter on page 12 of a general catalogue nobody has tested, from a supplier who also sells plumbing. We only sell this.

Range

34 SKUs

Ten machine lines, four rail and base configurations, every length from 0.6 m to 1.8 m.

Accessories

Five lines

Levellers, screeds, folding rulers, a 12-line laser and a tile vibrator — same buyer, same container.

Packaging

From 200 units

Your carton, your manual language, your label. Print proofed before the run.

Terms

30 / 70 T/T

30% with the order, 70% before shipment. Other terms discussed on larger or repeat orders.

The range at a glance

The cutters, compared

The difference between models is the rail and the base. Everything else — the scoring wheel, the spares, the handling — stays the same across the range, which is what makes a mixed order practical.

ModelRail & baseCutting lengthsSKUsCutting depthNet weight
TC-SFull steel, solid steel rail0.6 / 0.8 / 1.0 / 1.2 m45–16 mm9.94–14.86 kg
TC-EFull steel, electroplated finish0.8 / 1.0 / 1.2 m35–16 mm11.58–14.86 kg
TC-FFull steel, red or blue finish0.6 / 0.8 / 1.0 / 1.2 m7—11.88–19.12 kg
TC-HHeavy full steel, widened bed1.2 m2—22.0–23.2 kg
TC-WWidened base, 1.6–1.8 m boards1.6 / 1.8 m25–16 mm24.6–26.86 kg
TC-XStainless steel rail, laser positioning0.8 / 1.2 / 1.6 m35–16 mm14.08–23.64 kg
TC-AAluminium rail, widest depth range0.8 / 1.0 / 1.2 / 1.6 / 1.8 m53–18 mm14.26–23.54 kg
TC-C1200Cut and chamfer in one machine1.2 m15–16 mm21.38 kg

A dash means cutting depth is confirmed per order against the factory specification sheet, rather than published unverified. Weights are net. Gross weights and carton dimensions for every SKU are on the individual model pages and in the range catalogue (PDF). Every model uses the same scoring wheel and the same spares kit, so one service-stock decision covers the whole shelf. Accessories and spares →

Product range

Ten machines. One supplier.

From the entry full-steel model to wide-base professional machines, a cutting-and-chamfering unit, on-site chamfering and a cordless paving machine. Every model shares the same wheel and spares line, so your service stock covers the whole range.

TIKARO TC-S manual tile cutter
TC-S
Full steel · solid steel rail · entry to mid range
Cutting length0.6–1.2 m
Cutting depth5–16 mm
Net weight9.94–14.86 kg
View model →
TIKARO TC-E manual tile cutter
TC-E
Electroplated finish · full steel
Cutting length0.8–1.2 m
Cutting depth5–16 mm
Net weight11.58–14.86 kg
View model →
TIKARO TC-W wide-base manual tile cutter
TC-W
Widened base · for 1.6 m and 1.8 m boards
Cutting length1.6 / 1.8 m
Cutting depth5–16 mm
Net weight24.6 / 26.86 kg
View model →
TIKARO TC-X manual tile cutter
TC-X
Stainless steel rail · laser positioning
Cutting length0.8–1.6 m
Cutting depth5–16 mm
Net weight14.08–23.64 kg
View model →
TIKARO TC-A manual tile cutter
TC-A
Aluminium rail · widest thickness range
Cutting length0.8–1.8 m
Cutting depth3–18 mm
Net weight14.26–23.54 kg
View model →
TIKARO tile cutting and chamfering machine
TC-C1200
Cut and chamfer in one machine
Cutting length1.2 m
Cutting depth5–16 mm
Net weight21.38 kg
View model →
TIKARO TC-F full steel tile cutter
TC-F
Full steel · red or blue · 0.6–1.2 m
Cutting length0.6–1.2 m
Net weight11.88–19.12 kg
Carton870–1470 mm
View model →
TIKARO TC-H heavy full steel tile cutter
TC-H
Heavy full steel · widened bed · 1.2 m
Cutting length1.2 m
Net weight22.0 / 23.2 kg
Carton1510×255×220
View model →
TIKARO handheld tile chamfering machine
TC-CH
Handheld chamfering · three configurations
Configurations3
Net weight2.9–5.96 kg
UseOn-site bevelling
View model →
TIKARO cordless tile paving machine
TC-PV
Cordless paving machine · 12V or 21V
Models88-150 / 89-150
Voltage12V / 21V
Net weight1.62–1.76 kg
View model →

Tile laying accessories

Levellers · screeds · folding rulers with hole templates · 12-line laser level · tile vibrator

View accessories
Why this range

Three reasons buyers stock it

A solid steel rail, not a folded one

The rail is what decides whether the cut lands clean. On large-format porcelain, a rail that flexes mid-score is what causes chipping — that is the failure this range is built around. A folded rail looks identical in a photograph and behaves completely differently on a 1.2 m tile.

Four lengths and one spares line

0.6 m for residential work, up to 1.8 m for large-format boards. Same wheel, same spares — your service stock covers every model you sell. A customer who breaks a wheel on the entry model can be served from the same box as the one who bought the widest machine.

Packaging ready for your market

Individual packing, customer-supplied packaging, customised cartons and foreign-language packaging from 200 units. Your brand on the box, your language in the manual, your barcode on the label — so it arrives shelf-ready rather than needing a repack warehouse.

How we control what ships

Four points where an order is checked

A trading company is only worth using if it inspects more carefully than the buyer could from 6,000 km away. These are the four points where we stop and verify, and each one produces something we can send you.

01 · Before the order

Specification in writing

The exact SKU, rail type, carton dimensions and manual language are confirmed against the factory sheet before anything is booked.

02 · In production

Progress on camera

Photographs at assembly and at packing, so you see the actual batch rather than a catalogue render.

03 · Before packing

Score test on tile

A sample unit is scored on the tile type you sell into and the cut is photographed — the one test that shows rail and wheel working together.

04 · Before shipment

Container check

Quantity, model mix and carton condition confirmed and photographed before the container is sealed.

If a batch fails a check, you hear about it before the container does. That is the whole point of buying through an exporter instead of a marketplace listing.
OEM & packaging

Built to carry your label

Individual packing, customer-supplied packaging and customised outer cartons are standard from 200 units. Foreign-language manuals and packaging are supported — including Arabic for GCC markets and Spanish for Latin America.

The private mould and colour changes on the machine itself are discussed per order, because tooling and paint runs have their own minimums. Tell us what you want on the machine and we will tell you what it takes.

Individual packingfrom 200 units
Customer-supplied packagingfrom 200 units
Outer carton customisationfrom 200 units
Foreign-language packagingsupported
Private mould & colourdiscussed per order
Request a Quotation
Packaging, as your channel needs it
  • Individual packingStandard export carton
  • Customer-supplied packagingFrom 200 units
  • Own-brand outer cartonFrom 200 units
  • Foreign-language printArabic, Spanish, Indonesian
  • Manual languageMatched to your market
Your artwork and your language. We proof the print before the run.
Documents

Paperwork that clears the port

Every shipment leaves with a complete document set, issued in the name you nominate. We send you drafts before the container sails, so a wrong consignee or a missing certificate is caught while it can still be corrected.

Certification is arranged to your market's requirements rather than assumed — CE where Europe applies, SASO/SABER for Saudi Arabia, and the equivalent for other destinations. Tell us the port and we will tell you what the file needs.

Document list and spec sheets
  • Proforma invoice and commercial invoice
  • Packing list with carton dimensions and weights
  • Bill of lading — original or telex release
  • Certificate of origin
  • Specification sheet for every model shipped
  • Photographs of the packed order before sealing
  • Certification arranged to destination requirements
  • Spare parts list for your service stock
Markets

Where this range sells

Tile format drives cutter length, and tile format differs by market. These are the three we ship to most often, with the sizes and paperwork each one actually asks for.

Also shipping to Latin America and other Southeast Asian markets. Ask about your destination.

How it works

From enquiry to first container

01

Enquiry

Tell us the models and quantities you need for your market. A rough mix is enough to start.

02

Quotation & sample

We quote your volume and arrange a sample unit for evaluation. Sample cost varies by model; freight is at your account.

03

Trial order

Mixed-model trial order so you can test demand before committing to a full container.

04

Repeat orders

Packaging and terms fixed, then reorder on the same specification — same carton, same manual, same label.

FAQ

Questions we get first

Are you a factory or a trading company?

We are an export company, not a factory. We export this range directly and handle your brand, certification, packaging, documents and after-sales. The machines are built by our factory partners to a specification we own and inspect.

Can you produce under our brand?

Yes. Individual packing, customer-supplied packaging, customised outer cartons and foreign-language packaging, from 200 units. Machine nameplate branding starts from 200 units as well. Private moulds and colour changes are discussed per order.

What is the MOQ and price?

Set per market and per volume. Send us the models you need and our export team will reply within one business day with pricing and packing details.

What are your payment terms?

30% deposit with the order, 70% balance before shipment — restated on your proforma invoice. For larger or repeat orders we can discuss other terms.

Which model should I start with?

Depends on the tile format your market sells. 1.2 m covers most residential porcelain; 1.6 m and 1.8 m are for large-format boards and need the wider base. Our Technical Centre explains how to choose.

Do you supply spare wheels?

Yes. Scoring wheels, oil cans and tool sets ship inside every carton, and spares can be ordered alongside any shipment. The whole range shares one wheel, so a single spare line covers every model you stock.

See all questions

Get a quotation for your market

Serving the GCC, Southeast Asia and Latin America — pricing quoted per market and volume. Tell us the models and quantities and we will reply within one business day.

Request a Quotation
WhatsApp Get Pricing